IBM H80 Series manual Password Utilities, Set Privileged-Access Password

Each option on the System Management Services Utilities menu is described in this section.

Password Utilities

Entering this selection permits access to the options shown on the following screen:

à	ð
	Password Utilities

1 Set Privileged Access-Password

2 Remove Privileged-Access Password

3 Unattended Start Mode <ON>

			.------.
			X=Exit
===>			------'
á				ñ
Set Privileged-Access Password	: The	privileged-access password protects against
the unauthorized starting	of	the	system	programs. When	this option is selected,
another screen displays	that	allows	the	setting of a	password.

You can set the password from either the Service Processor or System Management Services menus. After the password is set, both the Service Processor and System Management Services automatically use the same password. The password is

limited to eight characters.

Remove Privileged-Access Password			: If	you	previously		had set a
privileged-access password and want to					removeRemove	it,	select
Privileged-Access	Password		.
Unattended Start	Mode	<ON>	: This selection is used to enable or disable
Unattended Start Mode. Use this				option	to instruct the			Service Processor to	rest
the power-state of the server after					a temporary power failure, which is neces
servers that		require	automatic power-on		after	a	power	failure. The default	setti
ON.

Chapter 4. Using System Management Services83