Testing Call-Out
During the setup, you entered your phone numbers for the pager (on page 58) and
customer voice (on page 58). These numbers are used for this test.
1. Your remote terminal is disconnected as a result of the Call-In test.
2. Call your server again.
3. At the Service Processor Main Menu, select Call-In/Call-Out Setup menu, then
select Call-Out test. This action causes a simulated error condition for the
purposes of this test.
4. After a few moments, a message displays, regarding an illegal entry. Press
Enter to clear the message and return to the main menu.
5. When your telephone rings, answer the call. You should hear the sound of a
telephone being dialed. This is your computer trying to page you.
If this test is successful, call-out is working.
Return to the “Telephone Number Setup Menu” on page 57 to enter the actual
telephone numbers your server will use for reporting problems.
Appendix C. Service Processor Setup and Test 175