IBM H80 Series manual Policy, Restart Enabled/Disabled, Enable/Disable Fast System Boot, Ipl

– Enable	supplemental		restart	policy		- The default setting is NO. If set to
YES,	the	service		processor		restarts the system when the system loses
control as			detected		by service		processor surveillance, and either:
	The Use	OS-Defined restart			policy	is	set to NO.
	OR

The Use OS-Defined restart policy is set to YES, and the operating system has NO automatic restart policy.

Refer to “Service Processor Reboot/Restart Recovery” on page 64.

– Call-Out before	restart	(Enabled/Disabled)		- If a restart is		necessary		due	to
a system	fault,	you	can enable	the	service processor	to	call	out	and report
the event. This option can be valuable if the number						of	these	events
becomes	excessive,		signalling a	bigger	problem.

Ÿ Power-On System

Allows immediate power-on of the system. For other power-on methods, see “Powering On the System” on page 4.

ŸPower-Off System

Allows the user to power-off the system.

ŸEnable/Disable Fast System Boot

Allows the user to select the IPL type, mode, and speed of your boot capabilities

Attention:	Selecting the	fast	IPL	results in several diagnostic tests being skipped
and a	shorter memory	test	being	run.

42 RS/6000 Enterprise Server Model H80 Series User's Guide