IBM H80 Series manual Did, Display?

Step 12

Did the	Diagnostic	Selection	Menu	display?
NO	IfProblem	Determination		was	selected from the Diagnostic Mode
	Selection menu, and if a				recent error	has	been logged in the error log,
	diagnostics		automatically		begin testing	the	resource.

Follow the displayed instructions.

Ÿ If the No Trouble Found screen is displayed, press Enter.

Ÿ If another resource is tested, repeat this step.

Ÿ If the Diagnostic Selection menu is displayed, go to “Step 13.”

If an SRN is displayed, record it, and go to “Step 14” on page 162.

YES Go to “Step 13.”

Step 13

The All Resources option checks most of the configured adapters and devices.

Select and run the diagnostic

tests

on the

resources

you are having problems wit

select

AlltheResources

option to check all of the configured resources. Find the

response

in

the

following table

and

perform

the

Action

listed in the Action column.

Diagnostic

Response

Action

An

SRN

is displayed.

Go to “Step 14” on page 162.

The

system

hangs.

Report SRN 109-200.

The

Testing

Complete

menu

andNo therouble

Press

Enter

and

continue with

the testing.

was found

message

is

displayed, and

you

have

not

tested

all

of

the

resources.

The

Testing

Complete

menu

andNo therouble

Go

to

“Step

17” on

page 163.

was found message displayed and you

have

tested

all

of the

resources.

Chapter 8. Hardware Problem Determination161