IBM H80 Series manual Sample File modemm1.cfg

Sample File modem_m1.cfg

#

#COMPONENT_NAME: (ESPSETUP) ENTRY SERVICE PROCESSOR SETUP ￿modem_m1

#FUNCTIONS: Modem configuration file specifically for IB￿M 7857-ð17 modem with

#Auto-Reliable feature. This feature must be turned off for Catcher calls.

#This example uses the AT&F reset command to choose the fact￿ory defaults.

#

#To allow dial commands for digital pagers, it is necessary￿ to reduce

#the number of characters in the dial command. Each comma (delay) has

#been set to 6 seconds (S8=6) for that reason.

#

#

#(C) COPYRIGHT International Business Machines Corp. 1996

#All Rights Reserved

#Licensed Materials - Property of IBM

#

#US Government Users Restricted Rights - Use, duplication ￿or

#disclosure restricted by GSA ADP Schedule Contract with￿ IBM Corp.

ICDelay 1 DefaultTO 1ð CallDelay 12ð

#

# %N Call-Out phone number %R Return phone number

#

#

# PROGRAMMING NOTE: No blanks between double quote marks ("￿).

condout:	send "AT&F\EðEð\r"	# Reset to factory defaults.
		# \Eð=data compression disabled
		# Eð=echo disabled
	ignore "ð\r" or "OK\r\n" timeout 2	# Ignore modem response.
	send "AT#Fð\Q2S8=6\r"	# Trellis modulation disabled
		# Retrain with adaptive rate
		# Set ,=6second
	expect "ð\r" or "OK\r\n" timeout 2	# Confirm commands successful
	send "ATVðXðSð=ð\r"	# Numeric response code
		# AT compatible messages
		# Auto-Answer disabled
	expect "ð\r" or "OK\r\n" timeout 2	# Confirm commands successful.
	done
connect:	send "ATDT%N\r"	# Tone dialing command.
		# %N from Call Home setup.
	expect "1\r" busy "7\r" timeout 6ð	# Expect a connection response.
	done
retry:	send "A/"	# Repeat the previous command.
	expect "1\r" busy "7\r" timeout 6ð	# Expect a connection response.

Appendix D. Modem Configurations189