IBM H80 Series manual Did the diagnostics

Step 3

This step attempts to load Online Diagnostics in service mode.

1.Turn off the power.

2.Turn on the power.

3.If the keyboard indicator displays, press the numeric 6 key on the keyboar

indicate		that		diagnostics				are to		be loaded.
4. Enter	requested				passwords.
5. Follow	the		instructions			to	select		a	console.
6. Wait	until		the	diagnostics				load	or	the system appears to stop.
Did the diagnostics			load?
NO	Go	to	“Step		5”	on	page 166.
YES	Go	to	“Step		6”	on	page 168.

Step 4

This step attempts to load the Standalone diagnostics.

1.Turn off the power.

2.Turn on the power.

3. Insert		the diagnostic					CD	into the CD-ROM drive.
4. If	the keyboard indicator displays, press the numeric 5										key on the keyboar
indicate		that		diagnostics				are to		be loaded.
5. Enter	requested				passwords.
6. Follow	the		instructions			to		select	a	console.
7. Wait	until		the	diagnostics				load	or	the system appears to	stop.
Did the diagnostics			load?
NO	Go	to	“Step		5”	on	page 166.
YES	Go	to	“Step		6”	on	page 168.

Chapter 8. Hardware Problem Determination165