Groups Views

Limited Functionality

Devices that show up under the “Limited Functionality” grouping are devices that meet one of the following criteria;

Unsupported firmware

These devices are running firmware which is the pre v1.5 which is required in order to be fully supported by PerleVIEW. These devices need to be upgraded to the latest version of software available.

You can have PerleVIEW automatically retrieve the latest device firmware by enabling the “Check for Firmware Updates” feature. See Check for Firmware Update . Alternatively, you can download the latest firmware from the Perle Web site at http://www.perle.com/downloads/

Once you have obtained the latest firmware, you must now deploy it to the device. See Deploying Firmware .

Factory Default

These devices have never been configured. They contain the default IP address of 10.0.0.10. Before PerleVIEW can access these devices, you must assign a valid IP address to them. For more information see Device -> Not Configured .

This grouping may or may not show up on the left hand navigation panel. It only appears if there are devices that meet the criteria for this group.

To view Limited Functionality devices select Devices -> Limited Functionality from the left navigation panel.

Limited Functionality

67

Page 67
Image 67
Perle Systems 5500320-12 manual Limited Functionality, Unsupported firmware, Factory Default