27
Getting Started Wizard
User Security
In order to log into PerleVIEW, you must be a valid Windows user on the PerleVIEW server. By
default, PerleVIEW is configured such that you also have to be configured on the PerleVIEW
application as a user before you can successfully log into PerleVIEW. This gives you an extra level
of control as to which Windows users will be allowed to access the PerleVIEW application.
For more information about User Security and Configuring Users see PerleVIEW User Accounts .
Click on the
Next button
to continue.
Require users to
be defined in the
PerleVIEW
database
Automatically
discover device
when SNMP
trap is received
from that device
PerleVIEW users must be defined in the Windows Server User Accounts as
well as within the PerleVIEW Database in order to gain access to the
PerleVIEW application.
Uncheck this option if you want any valid Windows user to have access to
PerleVIEW.
If PerleVIEW is configured as an SNMP trap host for this device, when the
device sends a trap to PerleVIEW, this will cause PerleVIEW to add the
device to its database (i.e. automatically discover the device). When this
happens, the global parameters are used for protocol timers and credential
validation.