Automatic Event Handling

Subject

Type in a message for the subject that is meaningful to you.

 

By default, PerleVIEW uses internal macros to configure the subject

 

message as:

 

Event on ${DeviceName} at IP address ${DeviceIPAddress}

 

Where ${DeviceName} is the actual Device Name or the Preferred Name if

 

configured.

 

${DeviceIPAddress} is the IP address of the device.

Body

Type in a body message that is meaningful to you.

 

By default, PerleVIEW uses internal macros to configure the body message

 

as:

 

Event occurred on ${DeviceName} at IP address ${DeviceIPAddress}.

 

${EventMessage}

 

Where ${DeviceName} is the actual Device Name or the Preferred Name if

 

configured.

 

${DeviceIPAddress} is the IP address of the device.

 

${EventMessage} is the text of a PerleVIEW generated message, see

 

Appendix B, "Event Information" or a Device generated message (see your

 

MCR-MGT users guide for Device messages).

After completing the fields, you can click on the Test button to test the connection to the E-Mail server. PerleVIEW will send a test message of “PerleVIEW event action handler test E-mail message”. If the test E-Mail is received at the destination, the test is successful. If not successful, then correct the parameters in error and retry the test.

If you do not wish to add any other actions to this event, then click on the Apply button to save the task instance.

Send SMS Text Message (via E-mail)

Send SMS Text

Message

(via E-mail)

Phone

Configure the cellular phone number where the SMS message will be sent.

number

For example: 9054770000

94

Page 94
Image 94
Perle Systems 5500320-12 manual Send SMS Text Message via E-mail, Subject, Body