11.4 <

Maintenance>
Toner particles can be released inside the machine but it does not mean
the machine is damaged. Contact a service representative when print
quality problems occur.
4
Pull the corresponding toner cartridge out from the
machine
.
5Thoroughly roll the toner cartridge five or six times to distribute the
toner evenly inside the cartridge.
Note
If toner gets on your clothing, wipe it off with a dry cloth and
wash clothing in cold water. Hot water sets toner into fabric.
6Hold the toner cartridge and align it with the corresponding slot
inside the machine. Insert it back into its slot until it locks in place.
7Close the front cover, then the side cover.
8Make sure that the cover is securely latched and then turn the
machine on.
Caution
If the cover is not completely closed, the machine will not
operate.
Replacing the toner cartridge
The machine uses four colors and has a different toner cartridge for each
one: yellow (Y), magenta (M), cyan (C), and black (K).
The status LED and the toner-related message on the display
indicates which each individual toner cartridge should be replaced.
The machine stops printing. Incoming faxes are saved in memory.
At this stage, the toner cartridge needs to be replaced. Check the type of
the toner cartridge for your machine. (Page 13.1)
1Turn the machine off, then wait a few minutes for the machine to
cool.
2Open the side cover.
Note
Toner particles can be released inside the machine but it
does not mean the machine is damaged. Contact a service
representative when print quality problems occur.