5.2 <

Copying>
Image tab
Erase Edge: Allows you to erase punch holes, staple marks, and
fold creases along any of the four documents edges. (Page 5.9)
Erase Background: Prints an image with no background.
(Page5.10)
Margin Shift: Creates a binding edge for the document.
(Page5.10)
Scan Enhance: Use this feature for the better quality of copy-
output. (Page 5.10)
Adjust Backside Image: Allows you to copy and image and
remove the back-side image shown through. (Page 5.10)
Copying originals
This is the normal and usual procedure for copying your originals.
1Press Copy from the Main screen.
2Place originals, face up, in the DADF, or you can use the scanner
glass with a single original document face down.
3Adjust the settings for each copy such as Original Size, Reduce/
Enlarge, Duplex and more. (Page5.3, Page 5.3)
4Select the tray by pressing the appropriate tray on screen.
5Enter the number of copies using the number keypad, if necessary.
6Press Start on the control panel to begin copying.