Use up/down arrows to go to the next screen. Select the appropriate option and press OK.
•Gray: Uses the black gradation to display an image. 8 bits per pixel.
•Mono: Displays an image in black and white. 1 bit per pixel.
Original Type
You can set the original document type in order to enhance the quality of a document being scanned.
Press Scan to USB > the Image tab > Original Type.
Or, press USB > Scan to USB> the Image tab > Original Type.
Select the appropriate option and press OK.
•Text: For originals that have text or line art.
•Text/Photo: For originals that have both text and photographs together.
•Photo: For originals that are continuous tone photographs.
Color Mode
Use this option to scan the original in Mono, Gray or Color mode.
Press Scan to USB > the Image tab > Color Mode.
Or, press USB > Scan to USB> the Image tab > Color Mode.
Select the appropriate option and press OK.
•Color: Uses color to display an image. 24 bits per pixel, 8 bits for each RGB, is used for 1 pixel.
Darkness
You can select the degree of darkness of the scanned output. If your original document is light or faded, press the right arrow to make the output darker.
Press Scan to USB > the Image tab > Darkness.
Or, press USB > Scan to USB> the Image tab > Darkness.
Press right arrow to enhance the darkness degree then, press OK.
Erase Background
You can lighten, reduce or deletes the dark background from scanning colored paper or newspaper originals.
Press Scan to USB > the Image tab > Erase Background.
Or, press USB > Scan to USB> the Image tab > Erase Background.
Select the appropriate option and press OK.
•Off: Disables this feature.
•Auto: Optimizes the background.
•Enhance: The higher the number is, the more vivid the background is.
•Erase: The higher the number is, the lighter the background is.
Scan to Edge
You can set the machine to scan full size of a page as it is. Usually, the machine scans a page except edges, which means the margin, especially when you do the copy job with certain sized paper in the tray. But if you scan and sent it right away via the network, as the file, the machine does not need to exclude the edges from the originals.
Press Scan to USB > the Image tab > Scan to Edge.
Or, press USB > Scan to USB> the Image tab > Scan to Edge.
Select On and press OK.
9.4 <Using USB flash memory>
