Samsung CLX-8385ND Series manual Authentication

Option	Description
IPv6	Machine supports IPv6 addresses for network
	printing and managements.
	• IPv6 Activate: When you select On, the Host
	Name and Link-Local Address will
	automatically be entered into the address
	field.
	• DHCPv6 Configuration: If you have a
	DHCPv6 server on your network, you can set
	one of the option for default dynamic host
	configuration.
	• Routers: Use DHCPv6 only when
	requested by a router.
	• DHCPv6 Addresses: Always use
	DHCPv6 regardless of router request.
	• DHCPv6 Off: Never use DHCPv6
	regardless of router request.

Authentication

This feature lets you control and lock all outgoing data, or change the password.

1Press Machine Setup on the control panel.

2Press Admin Setting. When the login message pops up, then enter password and press OK.Press the Setup tab > Authentication.

Option		Description
Authentication	No	It disables Authentication Mode.
Mode	Authentication
	Mode
	Network	It enables the authentication mode
	Accounting	which is set from the Job Account
		menu in the SyncThru™ Web
		Admin Service.
	Standard	You can set the local account for a
	Accounting	certain user. If the user with that
		account performs the printing job,
		the machine counts it.

Option		Description
Authentication	Foreign Device	When you install the optional FDI
Mode	Interface	kit, select On to activate it.
(continue)		• Job Timer: If there is not enough
		credit, you can set the machine to
		cancel a job right away or wait a
		designated amount of time for a
		deposit.
		• Print Job Control: When it is
		enabled, the both computer
		printing and copying are possible
		since the credit remains. With
		Disable, copy printing needs the
		credit. However, when printing a
		report or a fax, the credit is not
		needed.
		• Inhibit Services: When no credit
		is left, the machine disables the
		copy job only with Copy Only.
		With All Service, scanning
		service and copy job are
		disabled.
		• Internal Credits: It is used when
		you cancel the job or when the
		job is cancelled by the device due
		to insufficient credits (coin) or is
		canceled by user’s request. If you
		select Enable, the machine
		deposits a credit equal to the
		number of sheets that did not
		print out correctly, then it prints
		next job for free (for the amount
		deposited). With Disable, even if
		you cancel the printing job, the
		machine includes jammed paper
		in the count and the cost of
		printing shall be recovered for the
		pages already billed.
		• Image Counter: Depends on
		whether the machine counts
		blank white pages.
Change Admin. Password		You can change the password
		for the Admin Setting
		authentication.

10.7 <Machine status and advanced setup>