Note
If this option is grayed out, select following options in the Basic tab to activate it;
-Duplex to 1
-Reduce/Enlarge to Original(100%)
-Paper Supply to Tray.
5Press On to activate this feature.
6Press OK.
7Press Start on the control panel to begin copying.
Note
Your original is divided into 9 portions. Each portion is scanned and printed one by one in the following order:
Clone copying
The machine prints multiple original images on a single page. The number of images is automatically determined by the original image and the paper size.
1Place a single original face down on the scanner glass. (Page 4.1)
Note
The original must be placed on the scanner glass in order to use this feature.
2Press Copy from the Main screen.
3Select the tray in Paper Supply.
4Press the Advanced tab > Clone Copy.
Note
If this option is grayed out, select following options in the Basic tab to activate it;
-Duplex to 1
-Reduce/Enlarge to Original(100%)
-Paper Supply to Tray.
5Press On to activate this feature.
6Press OK.
7Press Start on the control panel to begin copying.
Book copying
Use this feature to copy a book. If the book or magazine is thicker than 30 mm (1.18 inches), start copying with the scanner lid open.
1Place the originals face down on the scanner glass. (Page 4.1)
Note
The original must be placed on the scanner glass to use this feature.
2Press Copy from the Main screen.
3Press the Advanced tab > Book Copy.
Note
To remove shadows of a book edge, press the Image tab > Erase Edge > Book Center and Edge Erase.
4Select the binding option.
•Off: Disables this feature.
•Left Page: Prints left page of the book.
•Right Page: Prints right page of the book.
•Both Page: Prints both facing pages of the book.
5Press OK.
6Press Start on the control panel to begin copying.
Booklet copying
The machine automatically prints on one or both sides of the paper, which are then folded to produce a booklet with all of the pages in the correct sequence.
The machine will also reduce and correctly adjust the position of each image to fit on the selected paper.
1Place the originals face up in the DADF. Or place a single original face down on the scanner glass. (Page 4.1)
2Press Copy from the Main screen.
3Select the tray in Paper Supply.
4Press the Advanced tab > Booklet.
5.7 <Copying>
