6.3 <

Faxing (Optional)>
Image tab
•Original Type: Enhances the fax quality based on the type of the
original document being scanned. (Page 6.7)
•Darkness: Adjusts the level of lightness or darkness of the fax.
(Page6.7)
•Erase Background: Reduces dark backgrounds or paper patterns
as in newspaper originals. (Page6.7 )
•Color Mode: Selects whether the user sends the fax in mono or
color. (Page6.7)
•Back: Returns to the Basic tab.
Sending a fax
This part explains how to send a fax, and the special methods of
transmission.
Note
When you place the originals, you can use either the DADF or
the scanner glass. (Page 4.1) If the originals are placed on both
the DADF and the scanner glass, the machine will read the
originals on the DADF first, which has higher priority in
scanning.

Setting the fax header

In some countries, you are required by law to indicate your fax number
on any fax you send.
1Press Machine Setup on the control panel.
2Press Admin Setting. When the login message pops up, enter
password and press OK. (Page 3.6)
3Press the Setup tab > Fax Setup > Machine ID & Fax No.
4Touch the input area to enter the machine name and your fax
number.
5Press OK.

Sending a fax

1Press Fax from the Main screen.
2Place the originals face up in the DADF.
3Adjust the document settings in the Image tab.
4Select Duplex and Resolution options in the Basic tab.
Note
If the originals are printed on both sides of the paper, select
2 Sided with left/right arrows in the Duplex feature.
5When the cursor is blinking in the input line, enter the fax number
using the number keypad on the control panel. Or use Address