3.6 <

Getting Started>
Machine's basic settings
After installation is complete, you may want to set the machine's default
settings. Check the next explanation if you would like to set or change
values.

Setting the authentication password

To set your machine up or change the settings, you have to login. To
change password, follow the next steps.
1Press Machine Setup on the control panel.
2Press Admin Setting.
3When the login message appears, enter password. Touch the
password input area, then the question marks appears, use the
number keypad on the control panel to enter the password. Then,
press OK. (Factory setting:1111)
4Press the Setup tab > Authentication.
5Press
Change Admin. Password
.
6Enter old and new password, and then confirm the new password.
7Press OK.

Setting the date and time

When you set the time and date, they are used in Delay fax and Delay
Print, also they are printed on reports. If, however, they are not correct,
you need to change it for correct time being.
1Press Machine Setup on the control panel.
2Press Admin Setting.
3When the login message appears, enter password with number
keypad and press OK. (Page3.6)
4Press the General tab > Date & Time > Date&Time.
5Select date and time using left/right arrows. Or touch the insert area
and use the numeric keypad on the control panel.
6Press OK.
Note
To change the format of date and time, press Date Format and
Time Format.

Changing the display language

To change the language that appears on the display, refer to the following
steps.
1Press Machine Setup on the control panel.
2Press Admin Setting.
3When the login message appears, enter password with number
keypad and press OK. (Page 3.6)
4Press the General tab.
5Press the down arrow to switch the screen and press Language.
6Select the desired language.
7Press OK.

Setting job timeout

When there is no input for a certain period of time, the machine exits the
current location. You can set the amount of time the machine will wait.
1Press Machine Setup on the control panel.
2Press Admin Setting.
3When the login message appears, enter password with number
keypad and press OK. (Page 3.6)
4Press the General tab.
5Press Timers.
6Select System Timeout.
7Select On.
8Select a duration using left/right arrows.
9Press OK.

Using power saving feature

The machine provides power saving features.
1Press Machine Setup on the control panel.
2Press Admin Setting.
3When the login message appears, enter password with number
keypad and press OK. (Page 3.6)
4Press the General tab.
5Press down arrow to switch the screen, press Power Saver.