Adjusting the document settings

Before sending a fax, you can adjust the document settings, such as resolution, darkness, color, duplex and so forth. Refer to explanation of this section.

Note

The document setting herein is for only current job. If you want to change the default setting on document settings, refer to Admin Setting > General tab > Default Settings. (Page 10.2)

Duplex

This function is especially intended for two-sided originals. You can select whether the machine sends the fax on one side or both sides of the paper.

Load the originals onto the DADF to use this function.

Press Fax > the Basic tab > Duplex. Use left/right arrows to toggle the value.

1 Sided: Is for the originals that are printed on one side only.

2 Sided: Is for the originals that are printed on both sides.

Resolution

Changing the resolution setting affects the appearance of the received document.

Press Fax > the Basic tab > Resolution. Use left/right arrows to toggle the values.

Standard: Usually recommended for originals with text. This option will reduce the transmission time.

Fine: Recommended for the originals containing with small characters, thin lines, or text that was printed using a dot-matrix printer.

Super Fine: Recommended for originals containing with extremely fine detail, this option is enabled only if the receiving machine also supports a Super Fine resolution.

Note

For memory transmission, Super Fine mode is not available. The resolution setting is automatically changed to Fine.

Original Type

You can set the original document type to enhance the quality of a document being scanned.

Press Fax > the Image tab > Original Type. Select the appropriate option on the screen and press OK.

Text: For originals with text or line art.

Text/Photo: For originals with both text and photographs together.

Photo: For originals that are continuous tone photographs.

Darkness

You can select the degree of darkness of the original document.

Press Fax > the Image tab > Darkness. Press the right arrow to enhance the darkness degree and press OK.

Erase Background

You can lighten, reduce or delete the dark backgrounds from scanned colored paper or newspaper originals.

Press Fax > the Image tab > Erase Background. Press On to activate this function and press OK.

Note

Erase Background is disabled if the Original Type is set to Photo.

Color Mode

Press Fax > the Image tab > Color Mode. Select option and OK.

Mono: Transmits a fax in black and white.

Color: Transmits a fax in color.

Setting up a fax phonebook

Use this feature to store destination names, fax numbers and transmission settings in your machine. There are two options, Individual and Group.

Individual: Stores up to 200 fax numbers. And the fax numbers which are stored in Individual work as Speed No..

Group: Makes groups when you frequently send the same document to several destinations. You can store up to 100 group dial numbers. Entries stored here will be available for selection within the sending list on the Basic tab of Fax. Dialing Group can be also setup comprising of many Individual entries.

The fax numbers, which are stored in Individual, work as Speed No..

Storing individual phone numbers (Speed No.)

6.7 <Faxing (Optional)>

Page 62
Image 62
Samsung CLX-8385ND Series manual Adjusting the document settings, Setting up a fax phonebook