Schneider Electric altivar 58 telemecanique, vw3-a58101 Drive Identification, Drive identification

GP_ATV58_EN.fm Page 71 Mardi, 2. avril 2002 6:09 18

Drive Identification

Drive identification

This parameter can always be displayed. It indicates the speed controller power and voltage as indicated on the identification label.

rEF	The power is displayed in kW if the 50/60 Hz selector switch on the speed controller
0.37 kW 200/240 V	is set to 50 Hz, and in HP if it is set to 60 Hz.

For speed controllers rated above 7.5 kW at 200/240 V and 15 kW at 380/500 V :

The rating is different according to whether it is a standard torque or high torque application. The speed controllers are supplied factory set at "high torque". "Standard torque" configuration is obtained in the following way :

ENT

	rEF
22 kW	380/500 V
		ESC
	rEF
+30 kW	380/500 V

rEF flashes rEF flashes

rEF	rEF
22 kW 380/500 V	+30 kW 380/500 V

ou ESC

ENT

rEF

+30 kW 380/500 V

ESC

ENGLISH

In "standard torque" applications the + sign precedes the power in kW. To return to "high torque" configuration, perform the same procedure.

"Standard torque" or "high torque" configuration preconfigures the "factory setting" of certain parameters :

•	Drive menu : UnS,	nCr, nSP, COS, tUn
•	Adjust menu : ItH,	IdC.

Changing from one to the other of these torque configurations therefore results in all these parameters returning to factory settings.

71