Schneider Electric vw3-a58101 manual BNSPedestal BLSDeadband Management of operation at low speed

GP_ATV58_EN.fm Page 86 Mardi, 2. avril 2002 9:13 21

Control Menu

ENGLISH

Code	Description	Adjustment range	Factory setting
rln	RV Inhib.	No - Yes	No

•Inhibition of operation in the opposite direction to that controlled by the logic inputs, even if this reversal is required by a summing or process control function.

	￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿			￿￿		￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿		￿￿￿￿
	• Inhibition of reverse if it is controlled by the FWD/REV key on the display module.
bSP	deadb./pedst				No			No
					BNS:Pedestal
					BLS:Deadband
	Management of operation at low speed :
	￿￿￿￿	￿￿￿￿￿￿￿￿￿￿￿￿￿		￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿		￿￿￿	￿￿￿￿￿￿￿￿￿￿￿￿￿￿
	￿￿￿			￿￿￿￿￿￿￿￿￿￿
				￿￿￿￿
CrL	AI2 min Ref.- mA				0 to 20 mA			4 mA
CrH	AI2 Max. Ref- mA				4 to 20 mA			20 mA
	Minimum and maximum value of the signal on input AI2.
	These two parameters are used to define the signal sent to AI2. There are several configuration
	￿￿￿possibilities,￿￿￿￿￿￿￿￿￿ one of which is to configure the input for a 0-20 mA, 4-20 mA, 20-4mA, etc signal.
	￿￿￿		￿￿￿	￿￿￿ ￿￿		￿￿￿￿

86