Schneider Electric vw3-a58101 manual To 150% or 0 to 800% 100%, LSP to HSP 10 Hz 2nd preset speed

ENGLISH

GP_ATV58_EN.fm Page 76 Mardi, 2. avril 2002 6:09 18

Adjust Menu

The following parameters can be accessed in the ‘handling’ macro-configuration

Code	Description		Adjustment range	Factory setting
UFr	IR Compens.	- %	0 to 150% or 0 to 800%	100%
	Used to adjust the default value or the value measured during auto-tuning. The adjustment range is
	extended to 800% if the SPC parameter (special motor) is set to “Yes” in the drive menu.
SLP	Slip Comp.	- %	0 to 150%	100%
	Used to adjust the slip compensation value fixed by the motor nominal speed.
SP2	Preset Sp.2 - Hz		LSP to HSP	10 Hz
	2nd preset speed
SP3	Preset Sp.3 - Hz		LSP to HSP	15 Hz
	3rd preset speed
SP4	Preset Sp.4 - Hz		LSP to HSP	20 Hz
	4th preset speed
SP5	Preset Sp.5 - Hz		LSP to HSP	25 Hz
	5th preset speed
SP6	Preset Sp.6 - Hz		LSP to HSP	30 Hz
	6th preset speed
SP7	Preset Sp.7 - Hz		LSP to HSP	35 Hz
	7th preset speed
Ctd	Curr.Lev.Att - A		0 to 1.36 In (1)	1.36 In (1)
	Current threshold above which the logic output or the relay changes to 1

(1)In corresponds to the speed controller nominal current indicated in the catalog and on the speed controller identification label for "high torque" applications.

76