Schneider Electric vw3-a58101, altivar 58 telemecanique Table of the analogue output assignments

ENGLISH

GP_ATV58_EN.fm Page 90 Mardi, 2. avril 2002 6:09 18

I/O Menu

Table of the analogue output assignments

I/O extension		Analog output AO
option cards
Speed controller without option		Analog output AO1
NO :Not assigned	(Not assigned)	X
OCR:Motor Curr.	(Motor current)	X
OFR:Motor Freq	(Motor speed)	X
ORP:Output ramp	(Ramp output)	X
TRQ:Motor torque	(Motor torque)	X
STQ:Signed Torq.	(Signed motor torque)	X
ORS:Signed ramp	(Signed ramp output)	X
OPS:PI ref.	(PI setpoint output) If one AI = PIF	X
OPF:PI Feedback	(PI feedback output) If one AI = PIF	X
OPE:PI Error	(PI error output) If one AI = PIF	X
OPI:PI Integral	(PI integral output) If one AI = PIF	X
OPR:Motor power	(Motor power)	X
THR:Motor Thermal	(Motor thermal state)	X
THD:Drive Thermal	(Drive thermal state)	X

Once the I/O have been reassigned, the parameters related to the function automatically appear in the menus, and the macro-configuration indicates “CUS : Customize”.

Some reassignments result in new adjustment parameters which the user must not forget to set in the adjust menu :

I/O		Assignments	Parameters to set
LI	RP2	Ramp switching	AC2 dE2
LI	JOG	Jog operation	JOG JGt
LI	PS4	4 preset speeds	SP2-SP3
LI	PS8	8 preset speeds	SP4-SP5-SP6-SP7
LI	DCI	Injection stop	IdC
LI	TL2	Second torque limit	tL2
LI	PR4	4 preset PI setpoints	PI2-PI3
AI	PIF	PI regulator	rPG-rIG-PIC-rdG-rED-PrG-
			PSr-PSP-PLr-PLb
AI	SFB	Tachogenerator	dtS
R2	BLC	Brake sequence	Ibr-brt-bEn-bEt-brL-bIP
LO/R2	FTA	Frequency threshold reached	Ftd
LO/R2	CTA	Current threshold reached	Ctd
LO/R2	TSA	Motor thermal threshold reached	ttd
LO/R2	F2A	2 nd frequency threshold reached	F2d
LO/R2	TAD	Drive thermal threshold reached	dtd
90