Schneider Electric vw3-a58101 Files menu, Adjust, Level 2 and Application if card present

ENGLISH

GP_ATV58_EN.fm Page 106 Mardi, 2. avril 2002 6:09 18

Files Menu

Files menu (continued)

Code Description

COd Password

Confidential code

The speed controller configuration can be protected by a password (COd).

CAUTION : THIS PARAMETER SHOULD BE USED WITH CAUTION. IT MAY PREVENT ACCESS TO ALL PARAMETERS. ANY MODIFICATION TO THE VALUE OF THIS PARAMETER MUST BE CAREFULLY NOTED AND SAVED.

The code value is given by four figures, the last of which is used to define the level of accessibility required by the user.

8888

This figure gives the access level permitted, without having the correct code.

Access to the menus according to the position of the access locking switch on the rear of the display module is always operational, within the limits authorized by the code.

The value Code 0000 (factory setting) does not restrict access.

The table below defines access to the menus according to the last figure in the code.

	Last figure in the code
Menus	Access locked	Display	Modification
Adjust	0 exc. 0000 and 9	1	2
Level 2 :	0 exc. 0000 and 9	3	4
Adjust, Macro-config, Drive, Control, I/O, Fault,
File (excluding code),
Communication (if card present)
Application (if card present)	0 exc. 0000 and 9	5	6
Level 2 and Application (if card present)	0 exc. 0000 and 9	7	8

For access to the APPLICATION menu, refer to the application card documentation.

The code is modified using the ▲ and ▼ keys.

If an incorrect code is entered, it is refused and the following message is displayed :

COd

Password Fault

After pressing the ENT or ESC key on the keypad, the value displayed for the Code parameter changes to 0000 : the level of accessibility does not change. The operation should be repeated.

To access menus protected by the access code the user must first enter this code which can always be accessed in the Files menu.

106