Sony DXC-D35 service manual Xxxx, Character Position Adjustment

3-3. Camera Adjustment

3-3-16. Character Position Adjustment

Equipment: Color monitor (or, B/W monitor)

Preparation: OUTPUT/DL/DCC +switch: BARS

Test point: MONITOR OUT connector

Adjustment Procedure

1.Set the “MARKER” to “ON” on the BASIC menu.

2. Select “PAGE 9” on the ADVANCE menu, set

“16:9/4:3” to “16:9” position. n

This step shall be performed for DXC-D35WS/ D35WSP only.

3.Set the “MARKER” to “CENT/90 %” on the “PAGE 4” of ADVANCE menu.

4.	Adjusting point:
	1CV1/MB-629 board (for DXC-D35/D35P)
	1CV3/MB-785 board (for DXC-D35WS/D35WSP)
	Specification:		“a”	=“b” (for NTSC)
			[for NTSC]
	PAGE 4 (NEXT		PREV	)	Safety zone
	MARKER	: CENT/90%		W:P
	LIMITS	: OFF			TONE
	ZEBRA	: 1		TONE		"b"
	ZEBRA1	: 70IRE			XXdB
	VF TALLY	: x2		XXdB		"a"
	LENS SEL	: 1		XXXX	XXXX
	EXIT MENU (YES		)

Specification: Bring the characters to the safety zone as close as possible, yet prevent them from overlapping. (for PAL)

	6
A	RV201	5
		CL201
	+
	C202	4

B

C

3

2 1

		[for PAL]
PAGE 4 (NEXT		PREV	)
MARKER	: CENT/90%		W:P
LIMITS	: OFF
ZEBRA	: 1
ZEBRA1	: 70IRE		TONE
VF TALLY	: x2		XXdB
LENS SEL	: 1		XXXX
EXIT MENU (YES		)

Safety zone

TONE

XXdB

XXXX

D

E

F

G

CV3 (DXC-D35WS/D35WSP only)

CV1

MB-629 board (B side) (DXC-D35/D35P)

MB-785 board (B side) (DXC-D35WS/D35WSP)

3-16 DXC-D35/D35WS(UC)

DXC-D35P/D35WSP(CE) V1