Sony DXC-D35 Fitting a VTR, Replacing the Lithium Battery, On the battery is facing you

DXC-	DXC-
D35P/D35WSP(CE)	D35/D35WS(UC)		Replacing the Lithium Battery
			1 Pull the upper part of the
			battery cover (on the rear of
V1
			the camera head) forward and
			turn the cover clockwise.
			For detaching the VTR or camera
			adaptor, see “Fitting a VTR” next
			page.
		Chapter2
		Fitting	2 Take out the lithium battery.
		and Connections
			3 Reverse step 2 to insert a
			replacement lithium battery.
			Make sure that the + symbol
			on the battery is facing you.

Rear of the camera head

Battery cover

Press down and pull out toward you.

Fitting a VTR

This section explains how to attach the DSR-1/1P to the camera head. The method for attaching a PVV-3/ 3P is similar.

1 Set the PRO 76-pin DIGITAL connector on the DSR-1/1P. (The camera connector on the PVV-3/3P is PRO 50-pin.)

For details, see the operating instructions for the DSR-1/1P.

2 Loosen the two screws and remove the shoulder pad.

When replacing the camera head grip with a camcorder grip, see “Using the Camcorder Grip” (page 27).

DSR-1/1P

Camera connector (PRO 76-pin DIGITAL)

Screws

Chapter 2 Fitting and Connections

4 Close the battery cover.

24 Chapter 2 Fitting and Connections

3 Align the projection on the bottom of the DSR-1/1P with the slot on the camera head.

	Slot	Projection
Camera head	Groove

(continued)

Chapter 2 Fitting and Connections 25

1-13