1-30Viewfinder Basic Menu

To display the basic menu pages, press the MENU/ STATUS switch downward while the normal indications are being shown in the viewfinder. The basic menu configuration can include up to eight pages (the configuration depends on the switch settings and the type of connected VTR).

Basic Menu Operations

The common operations on all basic menu pages are described below.

To change the page or item

Contents and Settings of Each Page

Each page’s contents and settings are described below.

On the DXC-D35WSL/D35WSPL, when the MENU MODE is set to 2 in advanced menu page 9, a page for aspect ratio settings (16:9/4:3) is added before basic menu page 1.

Basic menu page 1

Basic menu page 2

Basic menu page 4

 

This menu is displayed only when an external sync

 

signal is input to the camera adaptor or VTR connected

 

to the camera head.

Item

Settings

SKIN DTL

0.0 (normal value) to 1.0

Sets the amount of

Smaller values set a softer skin detail.

skin detail

 

 

The cursor is moved downward each time you press

 

the MENU/STATUS switch down. Once the cursor

 

has reached the last item on a page, press down the

 

MENU/STATUS switch to go to the next page. When

 

the last page is being displayed, pressing down the

 

MENU/STATUS switch returns the display to the

 

normal indications.

 

The cursor is moved upward each time you press up

Chapter 4

the MENU/STATUS switch. Once the cursor has

reached the first item on a page, pressing up the

MENU/STATUS switch returns the display to the

Viewfinder

normal indications.

To change settings

Screen

After using the MENU/STATUS switch to move the

Indications

cursor to the item on which you will change the

setting, press either the UP/ON button or the DOWN/

and

OFF button to select the desired value.

To reset any item to its shipped settings, press the UP/

 

Item

A. IRIS

Sets a base value for auto adjustment of lens iris.

DTL LEV Sets the detail (edge) emphasis.

M.BLACK Sets the master pedestal level.

Settings

–1.0, –0.5, ±0 (normal value), +0.5, +1.0

Negative adjustment values set a narrower lens iris and positive values set a wider lens iris.

–99 to ±0 (normal value) to +99 Negative adjustment values soften the image’s edges and positive values sharpen them.

–99 to ±0 (normal value) to +99

Negative adjustment values make dark areas of the picture darker and increase the contrast. Positive adjustment values dark areas of the picture lighter and reduce the contrast.

correction.

 

DL LEV

LOW, STD (normal value), HIGH

Sets the

Set the amount of DynaLatitude

DynaLatitude level. effects as high level, standard level

 

(STD), or low level.

PRE.WHT

When the FILTER control is set to 1

Sets the color

(3200K): 2200 to 3200 (normal value)

temperature of the

to 4300

preset white

When the FILTER control is set to 2

balance.

(5600K + 1/8 ND), 3 (5600K) or 4

 

(5600K + 1/64 ND): 4600 to 5600

 

(normal value) to 12000

Basic menu page 3

This is displayed when the SET UP switch has been set to FILE.

Item

Settings

SC PHASE

000 (normal value) to 999

Sub carrier phase

 

adjustment for

 

when camera is

 

genlocked.a)

 

H PHASE

000 to 135 (normal value) to 199

Horizontal phase

 

adjustment for

 

when camera is

 

genlocked.a)

 

a)This applies when using an external sync signal to synchronize operation of several cameras (see page 39).

Basic menu page 5

Chapter 4 Viewfinder Screen Indications and

Menus

ON button and the DOWN/OFF button at the same

 

time.

DXC-

DXC-D35/D35WS(UC)

D35P/D35WSP(CE)V1

 

58 Chapter 4 Viewfinder Screen Indications and Menus

STRETCH

–16 to ±0 (normal value) to +15

Sets black stretch/

This function adjusts the intensity of

compress value.

dark areas of the screen. Negative

 

values make these areas darker

 

(black compress) and positive values

 

make these areas brighter (black

 

stretch).

SHUTTER

DXC-D35/D35WSL: 1/100 (normal

Sets shutter speed

value), 1/250, 1/500, 1/1000, 1/

or CLS/EVS setting

2000, EVS, CLS (60.4 Hz to 200.3

(see page 84).

Hz)

 

DXC-D35P/D35WSPL: 1/60 (normal

 

value), 1/250, 1/500, 1/1000, 1/

 

2000, EVS, CLS (50.3 Hz to 201.4

 

Hz)

 

This selects either the shutter speed

 

or the scan frequency or EVS for the

 

clear scan function.

Menus

For details of this operation, see “Setup Files” (page 71).

Chapter 4 Viewfinder Screen Indications and Menus 59

Page 38
Image 38
Sony DXC-D35 service manual 30Viewfinder Basic Menu, Basic Menu Operations, Contents and Settings of Each