Sony DXC-D35 16Fitting the Lens, Fitting optional filters, With the lens fixing lever

1-16Fitting the Lens

DXC-D35P/D35WSP(CE) V1 DXC-D35/D35WS(UC)

In the case of the DXC-D35K/D35PK model, the lens is already fitted. In other cases, use the following procedure to fit the lens.

1 Remove the retaining rubber which prevents the lens mount from coming loose, then raise the lens fixing lever, and remove the lens mount cap.

Chapter 2
Fitting and	2 With the lens fixing lever
Connections
	turned fully counterclockwise,
	push in the lens, aligning the
	projection on the lens with the
	cutout on the camera.

3 Supporting the lens, turn the lens fixing lever fully clockwise. Replace the retaining rubber on the lens mount.

30 Chapter 2 Fitting and Connections

Retaining rubber

Lens mount cap

Align and push in.

Lens fixing lever

4 Using the triangular mark as a guide, push the lens connector into the LENS connector on the camera head, until it clicks into place. Fasten the cable with the clamps.

Triangular mark

LENS connector

Fitting optional filters

Loosen the lens hood fixing screw to remove the lens hood, then attach the filter.

Remove lens hood

Lens hood fixing screw

Filter (optional)

Chapter 2 Fitting and Connections 31

Chapter 2 Fitting and Connections