Sony DXC-D35 service manual Viewfinder Advanced Menu, To set the camera ID

1-34

Viewfinder Advanced Menu

Item

VF TALLY

Selects whether or not to use more than one REC/TALLY indicators in the viewfinder (displayed only when the DXF-701/701CE/701WS/ 701WSCE/801/801CE viewfinder is attached).

VF PLAY

Selects the video signal displayed in the viewfinder during playback of the DSR- 1/1P (displayed only when the DSR-1/1P is connected)

LENS SEL

Selects the types of the lens.

Settings

×1: Uses only the upper REC/TALLY indicator.

×2 (normal value): Uses two REC/TALLY indicators.

Y (normal value): Y signal

VBS: Composite video signal

1 (normal value), 2, 3, 4 For details, see “Designating the lens” on page 90.

Item	Settings
GAIN INDa)	ON (normal value): Always
Selects whether or not to	displays.
always show the gain	OFF: displays for two
setting indication on the	seconds only when the
normal indications.	setting has been changed.
FILTER INDa)	ON (normal value): Always
Selects whether or not to	displays.
always show the FILTER	OFF: Displays for two
knob setting indication on	seconds only when the
the normal indications.	setting has been changed.
The FILTER knob setting
indicator is always displayed
when in EZ mode.
WHITE INDa)	ON (normal value): Displays.
Selects whether or not to	OFF: Not display.
show the setting of the white
balance switch.

Item	Settings
TC INDa)	ON (normal value):
Selects whether or not to	Displays.
show the time data indication	OFF: Not display.
on the normal indications
(valid only when the DSR-1/
1P or PVV-3/3P is
connected).
ID IND	ON (normal value):
Selects whether or not to	Displays.
display the camera ID when	OFF: Not display.
displaying color bars.
ID SET	See “To set the camera ID”
Sets the camera ID (up to	below.
eight characters, including
alphanumerics, symbols,
and spaces).

5 When you have finished entering the text, move the cursor to the parenthesis position.

This clears the displayed menu and returns to the normal indications.

Advanced menu page 7

Advanced menu page 5

	Chapter 4
	Viewfinder	Item	Settings
	Screen	SS INDa)	3SEC: Displays shutter
		Selects the mode for	setting for three seconds only
	Indications	showing the shutter setting	when the setting has been
		when displaying the normal	changed.
		indications.	ALWAYS (normal value):
			Displays the shutter setting at
	and		all times.
		LL INDa)	ON (normal value):
	Menus	show the LOW LIGHT	OFF: Not display.
		Selects whether or not to	Displays.
		indication on the normal
		indications when inadequate
		lighting is detected.
		MIC INDa)	ON (normal value):
		Selects whether or not to	Displays.
		show the camera	OFF: Not display.
		microphone output
		indication on the normal
		indications.
		IRIS INDa)	ON (normal value):
DXC		Selects whether or not to	Displays.
		show the lens’s F-stop value	OFF: Not display.
		(iris indication) on the
-		normal indications. The F-
D35P/D35WSP(CE)V1	DXC-D35/D35WS(UC)
		stop value is always

displayed when in EZ mode.

SKIN INDa)	ON (normal value): Displays.
Selects whether or not to	OFF: Not display.
show the setting for skin
detail correction.

a)When the viewfinder’s DISPLAY switch is set to OFF, indications related to these items are not displayed even when menu settings are set to ON.

Advanced menu page 6

Item	Settings
AUDIO INDa)	ON (normal value):
Selects whether or not to	Displays.
show the audio level	OFF: Not display.
indication on the normal
indications (valid only when
the DSR-1/1P or PVV-3/3P
is connected).
TAPE INDa)	ON (normal value):
Selects whether or not to	Displays.
show the VTR’s remaining	OFF: Not display.
tape indication on the normal
indications. (valid only when
the DSR-1/1P or PVV-3/3P
is connected).

a)When the viewfinder’s DISPLAY switch is set to OFF, indications related to these items are not displayed even when menu settings are set to ON.

a)When the viewfinder’s DISPLAY switch is set to OFF, indications related to these items are not displayed even when menu settings are set to ON.

To set the camera ID

1 Press the MENU/STATUS switch to move the cursor to ID SET.

The cursor (→) changes to the text entry arrow (↓).

Current camera ID

2 Press the MENU/STATUS switch to move the text entry arrow.

Press the MENU/STATUS switch upward to move the cursor to the right or downward to move it to the left.

3 Press the UP/ON button or DOWN/OFF button to enter the desired characters.

The displayed character changes each time the UP/ ON button is pressed. It changes in reverse order each time the DOWN/OFF button is pressed.

4 Return to step 2 and repeat the text entry procedure.

a) At shipping, the EZ MODE is set to STD.

Item	Settings
EZ MODE	STD (normal value):
When the EZ MODE button	Changes settings to
has been set to EZ mode	standard settings.
ON, this selects whether or	CUSTOM: Changes only
not to change the settings of	some settings to standard
other switches and menus to	settings.
used during remote	specified, see “EZ mode	Chapter4
the standard settings. (The	For details of the settings
EZ mode function cannot be	when STD or CUSTOM is
operation.)	settings” on next page.	Viewfinder
A.IRIS-AGC	F1.8, F 2.8 (normal value),
Selects auto iris adjustment	F4, F5.6
which sets an F-stop value		Screen
(displayed only when the EZ
that can be switched to AGC
MODE is set to CUSTOM).		Indications
A.IRIS-AE	F5.6 , F8, F11, F16 (normal
Selects auto iris adjustment	value)
which sets an F-stop value		and
that can be switched to AE
(displayed only when the EZ		Menus
MODE is set to CUSTOM).
AGC LIMIT	0 dB, 3 dB, 6 dB, 9 dB, 12
Sets an upper limit value for	dB (normal value)
AGC adjustment (displayed
only when the EZ MODE is
set to CUSTOM).

66 Chapter 4 Viewfinder Screen Indications and Menus

Chapter 4 Viewfinder Screen Indications and Menus 67