ClipLink Operation Flow
Time codes recorded for Mark IN/OUT points
There is a gap between actual time codes and Mark IN/ OUT time codes recorded in the cassette memory, as shown in the figure below. The frame digit is incremented at each Mark IN point and is decremented at each Mark OUT point.
| Mark IN |
| (or Rec IN) |
Actual time code | 12:23:15:10 |
Frame digit incremented
Time code
recorded in the12:23:16
cassette memory
(The Index Picture is the image around 12:23:15:10.)
Cue | Mark OUT |
(or Rec OUT) | |
12:34:20:20 | 12:39:24:23 |
Frame digit decremented Cue
12:34:20:2012:39:24
Recording capacity for Mark IN/OUT time codes and Cue point time codes
When in Mark mode, up to 198 pairs of Mark IN and Mark OUT points can be recorded (if using a cassette with 16 Kbits of cassette memory).
When in Cue mode, up to 396 time codes points (including all cue point time codes and all Mark (Rec) IN and Mark (Rec) OUT time codes) can be recorded (if using a cassette with 16 Kbits of cassette memory).
Appendix
106 Appendix
