
2-11. Disconnecting/Connecting the Flexible Card Wire
The flexible card wires are used among the
Disconnecting
1. Turn off the power of the camera.
Type A
(between the MB board and
Type B
(between the MB board and TG board)
2. Slide portion A in the direction of the arrow and disconnect the flexible card wire.
Type A | Type B |
A
A
Contact surface | Contact surface |
Connecting
m
.Be careful not to insert the flexible card wires obliquely.
.Check that the contact surface of the flexible card wire is not soiled with dust.
Type A
1.Insert the flexible card wire as far as it will go into connector with the contact surface of the wire faced to the board.
Type B
1.Slide portion A in the direction of the arrow and insert the flexible card wire as far as it will go into connector with the contact surface of the wire put down.
2.Slide portion A in the opposite direction of the arrow and lock.