.Page 4 File Basic Setting
PAGE4 (NEXT PREV)
M.BLACK | : | ±0 |
STRETCH | : | ±0 |
M.GAMMA | : | ±0 |
DTL LEV | : | ±0 |
V DTL LEV | : | _10 |
DTL FREQ | : | M |
EXIT MENU (YES )
.Page 5 File HUE Setting
PAGE5 (NEXT PREV)
SAT | : | ±0 |
HUE | : | ±0 |
SKIN SAT | : | ±0 |
SKIN HUE | : | ±0 |
EXIT MENU (YES )
2-12. Service Mode Operation
M.BLACK | Master black level setting |
STRETCH | Black stretch level setting |
M GAMMA | Master GAMMA level setting |
DTL LEV | Detail level setting |
V DTL LEV | V detail level setting |
DTL FREQ | Detail center frequency setting |
FILE DATA selected with SET UP switch is displayed on the PAGE 4 to
11.When data value is changed, the data in the FILE DATA selected with SET UP switch is also rewriten.
When the SET UP switch is switched while any of PAGE 4 to 11 is displayed, the display is changed in response to the SET UP switch position.
SAT | Chroma setting |
HUE | HUE setting |
SKIN SAT | Chroma setting for the skin tone area |
SKIN HUE | HUE setting for the skin tone area |
.Page 6 File Knee /GAMMA Setting
PAGE6 (NEXT | PREV ) | |
M.KNEE P | : | 300 |
M.KNEE S | : | 90 |
GAMMA TBL | : | B |
COMB | : OFF | |
EXIT MENU | (YES ) | |
|
|
|
M.KNEE P | Standard value setting of master knee point |
M.KNEE S | Standard value setting of master knee slope |
GAMMA TBL | Selection of GAMMA table A/B |
COMB | A : Rising gain |
| B : Rising gain |
| COMB Filter selection |
| (OFF/GR/R/G) |
.Page 7 File Matrix Center Value Setting
PAGE7 (NEXT | PREV ) | |||
: | 38 | |||
: | 10 | |||
: | 6 | |||
: | 15 | |||
: | 6 | |||
| ||||
: | 7 | |||
EXIT MENU | (YES ) |
| ||
|
|
|
|