Using Accessories
Fitting optional microphones (operable with a 48 V supply) other than the
Use the same fitting procedure as for the
Slender microphones (19 mm (3/4 inch) diameter): use the microphone adaptor supplied with the
Chapter 2 | Fitting to a Tripod | |
First fit the | ||
FittingandConnections | ||
then mount the camera on the tripod adaptor. | ||
|
Note
After removing the camera, if the tripod adaptor pin has not returned to its original position, hold down the red button and move the lever in the direction of the arrow to return the pin to its original position. It is not possible to mount a camera with the pin left out.
Pin
Using the Optional CAC-4 Chest Pad
Using the Carrying Case
Stowing the camera
Align the camera with the base of the case, and slide the camera in forward.
Checking that the pin at the rear engages correctly, push forward until it locks into place.
Notes
•Bring the viewfinder into the horizontal position, slide it fully rearward and to the left, then fix before stowing.
•When an optional microphone
Align the camera with the base of the carrying case.
Base
Lever
Chapter 2 Fitting and Connections
Tripod
Side the camera forward along the slot, until it clicks firmly into place.
Removal
Hold down the red button and pull the lever in the direction of the arrow.
DXC- |
| |
D35P/D35WSP(CE)V1 | Chapter 2 Fitting and Connections | |
| 34 |
When using the camera on your shoulder, attaching the optional
For details see the instructions provided with the
Example of fully-stowed carrying case
This can be stored with the following system component fitted.
•
•
•
•Zoom lens
•
•
Fasten straps.
Cassettes, camera cables, etc.
Case
Chapter 2 Fitting and Connections | 35 |
