Location and Function of Parts
| 6 REC/TALLY (recording/tally) indicators (red) | |
| • This flashes from the time when you press the VTR | |
| button (0 on page 17 and qa on page 20) on the lens | |
| or camcorder until recording starts, then stays on | |
Chapter | continuously during recording. | |
• When using a camera control unit, this lights when | ||
the video from the camera is selected. | ||
1 | • This is also used to indicate a fault. (See page 97.) | |
Overview | ||
• The lower indicator can be disabled by menu setting. | ||
(See page 66.) | ||
| 7 GAIN UP indicator (orange) | |
| This lights when the gain is 3 dB or more. | |
| 8 SHUTTER indicator (red) | |
| This lights when the SHUTTER switch (6 on page | |
| 17) is in the ON position. (If the EVS is selected, the | |
| indicator will not light.) | |
| 9 PEAKING control | |
| This adjusts the outline intensity of the viewfinder |
qg DISPLAY switch
Set this switch to OFF when you want to remove the character data from the viewfinder and the monitor connected to the MONITOR OUT connector. However, items which are set to OFF in advanced menu page 5 and page 6 are not displayed even when this switch is set to ON.
qh Viewfinder connector
Connect this to the VF connector (2 on page 16).
Chapter2
Fitting and
Connections
Replacing the Lithium Battery
image. (See page 88.) |
0 CONTRAST control |
This adjusts the contrast of the viewfinder image. (See |
page 88.) |
qa Tally lamp |
When the TALLY switch qf is in the ON position, this |
operates in the same way as the REC/TALLY |
indicators 6. |
qs BRIGHT (brightness) control |
This adjusts the brightness of the viewfinder image. |
(See page 88.) |
qd Eyepiece release catch |
To view the viewfinder screen directly, press this |
catch, and hinge up the eyepiece. |
qf TALLY switch |
Set this switch to the ON position to use the tally lamp |
qa. |
The camera head uses a lithium battery (CR2032) to retain date and time data.
When the lithium battery’s voltage falls, the clock indication dose not appear. Replace the lithium battery and set the clock (see page 86).
Notes
•Carefully read the instructions for replacing the lithium battery. Lithium batteries may explode if misused.
•Use only
22 Chapter 1 Overview
Chapter 2 Fitting and Connections | 23 |
