V1 |
|
Viewfinder Screen Indications
Display by holding the | Status indications | |||
|
| |||
MENU/STATUS switch up |
| |||
while the normal |
| |||
| ||||
indications are present. |
| |||
WHITE | : AUTO/A | |||
|
|
| A.IRIS: STD | |
|
|
| FILE | : STD |
|
|
| DCC+ | : OFF |
|
|
|
| |
|
|
|
|
SS :OFF
BATT:13.0V
Displaying the advanced menu and switching to the normal indications
Use the following procedure to display the advanced menu.
1Move the POWER switch to the ON position while
holding down the UP/ON button to display the advanced menu selection screen.
Move the POWER switch to the ON position with the UP/ON button held down
UP/ON buttona)
Normal indications
TCG 12:34:56:00
| W:A |
| |
CLIPM |
|
198 | F5.6 |
| 0dB |
| 3200 |
99 04 | 01 |
SS :1/100 10:00 | AM |
Display by moving the POWER switch to the ON position.
Switch by pressing the MENU/STATUS switch down.
Normal indications
REC
TAKE TCG 12:34:56:00
W:A
NG
CLIPM
198F5.6 0dB
56ND
:LOW LIGHT | 99 04 | 01 |
SS :1/100 | 10:00 | AM |
Page 1
2 To display advanced menu page 2
immediately, move the cursor to the menu number and then press the DOWN/OFF button.
To reinitialize all settings in the advanced menu to their factory defaults
1Align the cursor to ALL RESET and press the UP/ ON button.
DOWN/OFF buttona)
Advanced menu page 1
cPAGE 1(NEXTcVPREVcv)
ALL RESET
UP/ON (YEScv)
buttona)
EXIT MENU (YEScv)
Align the cursor to ALL |
Confirmation RESET and press the |
|
|
| page 2 |
|
|
|
|
| |
cPAGE2 (NEXTcV PREVcv) | UP/ON | |||
|
|
| ||
GAIN |
|
| button c) | |
HIGH: 18dB | ||||
MID | : | 9dB |
| |
LOW | : | OdB |
| |
|
|
|
| |
DL | : ON |
|
|
EXIT MENU (YEScv)
UP/ON or DOWN/
a)
cA.IRIS : ± 0
(The indication changes to “ALL RESET
screen | UP/ON button. |
OFF button page 3
DTL LEV: ± 0
M.BLACK: ± 0
STRETCH: ± 0
SHUTTER: OFF
Page 2
SURE?”.)
2Press the UP/ON button again. (The indication changes to “ALL RESET OK” and reinitialization completes.)
To cancel the reinitialization, move the cursor instead of pressing the UP/ON button.
| |
PAGE 1(NEXTcV PREVcv) |
|
| |
cALL RESET SURE? |
|
| |
(YEScv) |
|
Move the cursor. | |
| |
| |
|
EXIT MENU (YEScv)
Press the UP/
cPAGE3 (NEXTcV PREVcv)
|
|
|
| |
AWB | MEM | : | 2 |
|
TONE |
| : | OFF | |
BARS |
| : | SMPTE | |
REMOTE1 | : | REC |
| |
REMOTE2 | : | MARK |
| |
BAUD | RATE: | 9600 |
| |
|
|
|
|
EXIT MENU (YEScv)
UP/ON buttonc)
Basic menu
cSKIN DTL: OFF DL LEV : STD PRE.WHT : 3200
ON button.
PAGE1 (NEXTcV PREVcv)
cALL RESET OK!
Move the cursor.
EXIT MENU (YEScv)
UP/ON or DOWN/
OFF buttona)
page 15b)
Page 8a)
cPAGE15(NEXTcV PREVcv)
SETUP NAVI CAMERAcTAPE
STORE DATA (YEScv)
EXIT MENU (YEScv)
Chapter 4 Viewfinder Screen Indications and Menus
cTITLE IND?(YEScv)
Switch by pressing the MENU/STATUS switch up.
a)Set the cursor to the page number and press the UP/ON or DOWN/OFF button.
b)The menu configuration differs according the camera head’s switch settings, the connected VTR, and the type of input signal. A
DOWN/OFF buttona) | UP/ON buttonc) |
c) Set the cursor to EXIT MENU and press the UP/ON button.
Chapter 4 Viewfinder Screen Indications and Menus
a)The menu configuration differs according to the camera head’s switch settings, the connected VTR, and the type of input signal. An
52 Chapter 4 Viewfinder Screen Indications and Menus
Chapter 4 Viewfinder Screen Indications and Menus 53