SPRAY ECU 10SR- A2644

V1.98 21/06/06

 

 

Major Topic Heading

21.6 SPRAY ECU 10SR

Figure 108: Spray ECU 10SR

Part Number: A2644

Firmware Version: BMS 209

Serial Number: 06000-060040: The SPEED connector (Connector 6) have the wrong pin-outs when connecting to the Raven Speed sensor. Pins 1 and 2 on the SPEED connector need to be swapped to connect directly with the Raven speed sensor. DO NOT connect unless Pins 1 and 2 have been swapped.

Serial Number: 060041- onwards: The SPEED connector has the right pin-outs to connect directly to an existing Raven speed sensor.

POWER /COMMS Looms: A2634

LOOMS: The Spray ECU 10SR ‘CONNECTOR 3’ plug connects directly to existing Raven 440 Sprayer Looms.

The Spray ECU 10SR ‘CONNECTOR 1’ plugs connects directly to existing Raven 4400 Sprayer Looms.

The Spray ECU 10SR ‘CONNECTOR 2’ is used for connecting remote boom section switches

ZYNX Sprayer Controller Software

1.OPTIONS/ECU/Controller: Select ‘Spray ECU’

2.OPTIONS/ECU/ECU Model: Select ‘ECU 10S, ECU 10SR’

.

Page 132

Page 132
Image 132
Topcom X20 manual Spray ECU 10SR