Setup Options- Tanks | V1.98 21/06/06 |
|
|
Pressure Sensor
The ZYNX Sprayer Controller can monitor the pressure in a spray system, which is displayed as a ‘pressure’ readout on the ‘Working Screen’. The ZYNX Spray Controller uses ‘Flow’ to control.
Also low and high pressure alarms can be set, to alert the operator when the pressure in the system goes above the high alarm point or below the low alarm point. See Section 12.0
Select ‘Pr. Sensor’ ‘Tank 1’ if an electronic pressure sensor is fitted to the sprayer, otherwise leave unselected.
Note: See Section 9.0 to select the type of electronic pressure sensor fitted to the system.
If more than ‘1’ tank was selected in the ‘Tanks’ window, then a pressure sensor can be selected for each tank that has a pressure sensor present.
Page 53
