Selecting the Right Controller | V1.98 21/06/06 |
|
|
21.1 SELECTING THE RIGHT “CONTROLLER”
The next 2 pages will help the operator to select the right ‘Controller’ from the ‘Controller’ window on the ‘OPTIONS/ECU page.
15 Pin White Molex Plug
Figure 73: KEE Sprayrate Interface | Figure 74: ZYNX 2500 and 5500 Interface |
Spray Interface
The ‘Spray Interface’ controller can be identified by having ‘Interface’ typed on the controller. There are 3 types of ‘Spray Interface’:
1- The ‘KEE Sprayrate Interface’ which be identified by having a ‘15 pin white molex plug’ wiring tail connection. The KEE Sprayrate Interface is shown above.
2- The ‘ZYNX 5500 INTERFACE’ can be identified by the 39 pin connector on the controller and battery leads.
3- The ‘ZYNX 2500 INTERFACE’ can be identified by the 2 green plugs one for flow and one speed. The controller has a 26 pin connector.
If you have any one of the above sprayrate controllers then select ‘Spray Interface’ in the ‘Controller’ window on the OPTIONS/ECU page.
Page 107
