![](/images/new-backgrounds/1302352/302352111x1.webp)
Setup Options- Tanks | V1.98 21/06/06 |
|
|
6.2Proportional Valve Settings
Figure 34: Proportional Valve Settings page
Spraying systems that use a proportional valve are controlling a hydraulic valve, which in turn drives a hydraulic motor which drives a pump. Spray regulation is controlled by changing the pump speed. The settings will need to be tuned for the sprayer.
Select ‘Prop. Valve’ in the ‘Controller’ window.
Select ‘Settings’, this will then open up the window to allow the operator to alter the settings for the proportional valve for the tank selected.
Valve Options
High Minimum PWM Range
Deselecting the ‘High Minimum PWM Range’ option (default) displays the ‘Min PWM’ range values between 5% and 40%.
Selecting the ‘High Minimum PWM Range’ option displays the ‘Min PWM’ range values from 42.5% to 60%.
Add Dither
Select ‘Add Dither’ when using Proportional Valves.
Enable Soft Start
The option ‘Enable Soft Startup’ should be left unselected.
Close Valve When Flow Off
The option ‘Close Valve When Flow Off’ should be left unselected.
Page 56