Spray ECU A1999 and A2006 | V1.98 21/06/06 |
|
|
21.3 SPRAY ECU (With Tails)
COMMS Looms 
Connector 2 
Connector 3 
Figure 78: Hagie A1999 Spray ECU
Part Number: A1999 (Hagie) and A2006 (Raven 330/440/450/ 460)
Firmware Version: BMS 207
A1999 (HAGIE S/P SPRAYER)
COMMS Looms: The 9 pin serial DB9 cable connects to a COM Port on the back of the ZYNX Console.
Connector 2: The ‘Connector 2’ plug is a 37 pin plug and his connects into the ‘Sprayer Harness’ on the Hagie S/P.
Connector 3: The ‘Connector 3’ plug is a 9 pin plug and this plug senses the inputs of the Section switches on the Joy Stick of the Hagie S/P. sprayer.
A2006 (RAVEN 330/440/450/460)
The A2006 Spray ECU looks similar to the above Spray ECU except it only has 2 glands on the side of Spray ECU (the above diagram shows 3), The A2006 has 2 connectors coming out of the larger gland (a ‘16’ pin plug and a ‘14’ pin plug); and 2 connectors coming out of the smaller gland (a Serial Comms DB9 and the 3 pin Raven speed sensor plug)
COMMS Looms: The 9 pin serial DB9 cable connects to a COM Port on the back of the ZYNX Console.
Connector 2: The ‘Connector 2’ plug is a 16 pin plug and his connects into the ‘Sprayer Harness’ on the Raven harness.
Connector 3: The ‘Connector 3’ plug is a 14 pin plug and this plug connects to a pressure input on the Raven harness.
Connector 4: The Connector 4’ plug is a 3 pin Conxall Raven Speed Sensor plug and connects to the Raven Speed Sensor harness .
ZYNX Sprayer Controller Software (A1999 and A2006)
1.OPTIONS/Controller: Select ‘Spray ECU’
2.OPTIONS/ECU Model: Select ‘ECU, ECU3’
Page 111
