Setting Up- Sprayer Switch Box

V1.98 21/06/06

 

 

17.10 Sprayer Switchbox

The switch box functions are only available if enabled in the OPTIONS/SWITCHES page, see Section 5.0, if connecting the KEE External Switch Box to the ‘Spray ECU’. The Switchbox connects to the 9 pin plug marked ‘SWITCH BOX’. When the External Switch Box switches are enabled, the equivalent ‘Working Screen’ buttons on the ZYNX Sprayer ‘Working Screen’ become disabled.

SECTIONS Switches- The section switches turn the boom sections ON or OFF.

(Up - OFF / Down - ON). The red LEDs next to each section switch turn ON when spraying and ‘Flash’ when the boom section is switched ON, but the ‘Master’ switch is OFF.

MASTER Switch Turns all selected boom sections ON or OFF. (Up - OFF / Down - ON).

AUTO-MAN- Turns the system from automatic mode to manual. (Up - Manual / Down - Auto).

INC - DEC- Each toggle changes the rate either up or down by the preset Increment Rate whilst in the Auto mode. (Up - INC / Down - DEC). When in the manual mode it increases and decreases the system pressure. (Up - INC / Down - DEC).

PARALLEL- When using guidance in conjunction with your ZYNX Spray rate controller you can use this button in lieu of the ‘PARALLEL’ button on the ZYNX screen. You still must select point ‘A’, point ‘B’, on the ZYNX screen.

GUIDE LOCK- When using guidance in conjunction with your ZYNX Spray rate controller you can use this button in lieu of the ‘GUIDE LOCK’ button on the ZYNX Guidance screen.

6 Section Switches

Guide Lock

Parallel Guidance

Increase/Decrease

Auto/Manual Switch

Master Switch

Figure 62: Sprayer Switchbox

Page 93

Page 93
Image 93
Topcom X20 manual Sprayer Switchbox