STATus Subsystem
STATus:OPERation:VXITrigger:TRIGger?
Queries the time when the VXI TTL Trigger signal was asserted. The time is relative to the mainframe power on time.
If there are multiple occurrences of the TTL Trigger signal, only the time of the first assertion is saved.
When no Trigger is detected, the query returns a value of 0 in all fields. At power on, or after starting the VXI monitor, the values of all fields are set to 0.
There is no command associated with this query.
Syntax STATus:OPERation:VXITrigger:TRIGger? <trigger>
Parameters | Parameter |
| Query response |
| {TTL0trig ... TTL7trig} | <Hour>,<Minute>,<Second> | |
Reset Value |
|
| |
Not Applicable |
| ||
Errors and Events | None |
|
|
Dependencies | None |
|
|
Examples | Query: | STAT:OPER:VXIT:TRIG? TTL0 | |
| Response: | 12,3,1 |
|
Related Commands STATus:OPERation:VXITrigger:CONDition?
STATus:OPERation:VXITrigger:ENABle
STATus:OPERation:VXITrigger?
3±52 | VX1410A & VX1420A IntelliFrame Mainframe Instruction Manual |