TEST Subsystem
TEST
TEST?
This command executes all internal self tests. If a failure occurs and the halt control is enabled, the test will immediately end. The query form returns the unique numeric identifier of the first test that failed. A value of zero is returned if there are no failures. The command form executes the same tests but returns no results code.
Each internal self test has a unique numeric identifier in the range of 1000 to 1999 (see Table 3±19 on page 3±149).
| *TST? and TEST? are aliases. |
| |
Syntax | TEST[LL] |
| |
| TEST[LL] |
| |
Parameters |
|
|
|
Parameter |
| Query response | |
| Not Applicable | <NR1> | |
|
|
| 0 |
|
|
| 1000 ≤ N ≤ 1999 |
Reset Value |
|
| |
Not Applicable |
| ||
Errors and Events | None |
|
|
Dependencies | None |
|
|
Examples | Command: TEST |
| |
| Query: | TEST |
|
| Response: | 0 |
|
Related Commands | TEST:RESults? |
| |
| TEST:RESults:VERBose? |
| |
VX1410A & VX1420A IntelliFrame Mainframe Instruction Manual | 3±151 |