Getting Started
EMI Configurations Perform the following steps if you intend to install the optional EMI Intermodule shields and/or blank EMI filler panels. Part numbers are listed under Optional Accessories on page 9±9:
NOTE. It is only necessary to install the EMI intermodule shields if your VXIbus module does not have EMI shielding. Backplane EMI DIN shields are standard.
1.Refer to Figure 1±14 and slide the EMI intermodule shields between the grooves of the card guide on one side of each installed VXIbus module. This is recommended to use with unshielded modules; the shielding may not be compatible with some shielded modules. The shield conforms with the VXI specification for intermodule shielding.
2.Install a blank EMI front panel for each empty slot, making sure that the EMI shielding is in contact with the adjacent front panel.
EMI Shielding strip (standard part on mainframe)
Double panel EMI filler
Single panel EMI filler
EMI intermodule shield
Figure 1±14: Installing the EMI intermodule shield and front panel EMI fillers
VX1410A & VX1420A IntelliFrame Mainframe Instruction Manual | 1±23 |