Getting Started

8.Using the mounting method determined from the previous step, secure the right slide-out track assembly to the front and rear rails. Seat the screws fully, but lightly, so that you can adjust the mounting later.

9.Tighten the screws left loose in step 4 to fix the front to rear flange spacing of the slide-out track assembly.

10.Repeat steps 6 through 9 to mount the left slide-out track assembly.

Left slide-out track

Left slide-out track

Use a bar nut if front rails are not tapped.

Left-front rail

10-32 Pan head

screws (4)

Mounting method A

Left-front rail

10-32 Flat head

10-32 Pan head

screws (4)

screws (4)

Use two flat head screws if the cabinet rails have countersunk mounting holes; otherwise, use two pan head screws.

Mounting method B

Figure 1±9: Installing the slide-out track assemblies in the rack (Top view)

WARNING. Because of the size and weight of the mainframe, installing the mainframe alone can result in personal injury or equipment damage. Installing the IntelliFrame Mainframe in the rack requires at least two people. One person should be on the left side of the mainframe with one hand holding the left front handle and with the other hand underneath the mainframe. The other person should do likewise on the right side of the mainframe.

11.Fully extend the inner tracks of each slide-out section out of the front of the rack until they lock.

12.Lift the mainframe and insert the left and right tracks that extend from the rear of the mainframe into the ends of the tracks that you just extended. Make sure that the tracks mounted on the mainframe slip just inside the inner tracks that you extended earlier.

VX1410A & VX1420A IntelliFrame Mainframe Instruction Manual

1±17