Getting Started

VXIplug&play position key for VX1410A/11A/20A

Screws (2)

Latch is

located at

the rear.

Track

Screws (2)

Screws (5)

 

Bracket

Handle Bracket

Figure 1±6: Installing the rackmount kit hardware

3.Remove the five 8-32 screws from both sides of the mainframe.

4.Attach the left and right inside tracks to the sides of the IntelliFrame Mainframe using five 8-32 flathead screws. Add a spacer plate between the left track and mainframe, refer to the Replaceable Parts on page 9±15. Orient the button latch so that it faces away from the mainframe and toward the rear.

Install the Mainframe Use the following procedure to install the IntelliFrame Mainframe in the rack: in the Rack

1.Identify the right and left slide-out track assemblies: find the date code label on each assembly. The assembly to be mounted in the left side of the rack (the side nearest the left side of the mainframe when it is mounted in the rack) has a date code that ends with LH (for left hand). The right assembly has a date code ending with RH.

2.Measure the distance between the front and rear rail of the rack.

1±14

VX1410A & VX1420A IntelliFrame Mainframe Instruction Manual