Reference
Table 3±6: Front panel display messages (Cont.)
Category | Message |
|
|
Power Supply Current Amperage | +24V Amps:XX.XXA |
Messages |
|
|
|
| +12V Amps:XX.XXA |
|
|
| +5V Amps:XX.XXA |
|
|
| ±2V Amps:XX.XXA |
|
|
| ±5.2V Amps:XX.XXA |
|
|
| ±12V Amps:XX.XXA |
|
|
| ±24V Amps:XX.XXA |
|
|
Power Supply Power Messages | Total Power:XXX.XW |
|
|
Temperature Status Messages | Ambient T:XX°C |
|
|
| ΔΤ S0,S1:XX,XX°C |
|
|
| ΔΤ S2,S3:XX,XX°C |
|
|
| ΔΤ S4,S5:XX,XX°C |
|
|
| ΔΤ S6,S7:XX,XX°C |
|
|
| ΔΤ S8,S9:XX,XX°C |
|
|
| ΔΤ S10,S11:XX,XX°C |
|
|
| ΔΤ S12:XX°C |
|
|
Fan Status Messages | Fan 1 RPM: XXXX |
|
|
| Fan 2 RPM: XXXX (VX1410A only) |
|
|
Filter Status Message | Filter Hr Left:HHHH1 |
Miscellaneous Messages | Time On:HHHHHH:MM |
|
|
| Hr of Oper:HHHHHH |
|
|
Date and Time Message | Year±Mon±XX XX:XX2 |
| SYSTEM OFF |
|
|
| SYSTEM OK |
|
|
1To reset the filter cleaning interval, display the filter status message by pressing the Next or Prev scroll buttons. While the message displays, press both buttons at the same time. The Filter Cleaning Interval will reset to the current interval.
2After power on a prompt will appear in the display. Press the PREV and NEXT buttons to set the date and time. Pressing the PREV or NEXT will cycle through the values, while pressing both buttons simultaneously moves the cursor to the next field.
You can also query the individual messages and status information using the commands and queries described in the remainder of this chapter.
VX1410A & VX1420A IntelliFrame Mainframe Instruction Manual | 3±11 |