Maintenance
Procedure 1: Removing the Mainframe Cover
Remove screws (12)
To remove the mainframe cover, refer to Figure 8±2 while performing the following steps:
1.Remove the 12 hex drive screws (6 each side) using a 3/32 Allen wrench.
2.Lift the front bottom corners up.
3.After tilting the cover up about 3 inches, lift the cover straight off the instrument.
Step 1 | Step 2 |
Step 3
Figure 8±2: Removing the mainframe cover
VX1410A & VX1420A IntelliFrame Mainframe Instruction Manual | 8±5 |