Maintenance

Procedure 8: Removing

the Front Panel Display

Assembly

To remove the front panel Display assembly (for VX1410A with Option 1M or VX1420A mainframes), perform Procedure 1 on page 8±5 and complete the following steps:

1.Remove the top cover of the mainframe (see Figure 8±11 on page 8±15, if necessary).

2.Refer to Figure 8±13 and disconnect the ribbon cable from the rear of the Display assembly.

3.Remove the 6-32 screws holding the Display assembly in place.

4.Gently remove the Display assembly from the mainframe.

When you reconnect the ribbon cable to the Display assembly, observe the orientation of Pin 1 as shown in Figure 8±13.

Pin 1

Display assembly

6±32 Screws (4)

Figure 8±13: Removing the front panel monitor display

VX1410A & VX1420A IntelliFrame Mainframe Instruction Manual

8±17