Maintenance

Procedure 9: Removing Perform the following steps to remove the EMI DIN shields: the EMI DIN Shields

1.Remove any modules surrounding the slots where you intend to remove the Backplane EMI DIN shields. Refer to Figure 8±14.

2.Remove two 4-40 Torxdrive T-10 screws that secure each EMI DIN shield to the backplane.

3.Remove EMI DIN shield from the backplane.

Install the EMI DIN shield by reversing the disassembly procedure.

Polarization hole

Screws (2)

Backplane EMI

DIN shield

Figure 8±14: Removing the backplane EMI DIN shields

8±18

VX1410A & VX1420A IntelliFrame Mainframe Instruction Manual