STATus Subsystem

STATus:QUEStionable:VOLTage:ENABle

STATus:QUEStionable:VOLTage:ENABle?

Sets or queries the contents of the Voltage Enable register. Setting unused enable bits does not generate an error; the bits are ignored.

If the power-on status clear flag is FALSE (see *PSC command on page 3±166) at power on, the register value will be restored from nonvolatile RAM; otherwise, the register value at power on is set to #H7FFF. Executing the STATus:PRESet command sets the register value to #H7FFF.

Syntax STATus:QUEStionable:VOLTage:ENABle <Mask>

STATus:QUEStionable:VOLTage:ENABle?

Parameters

<Mask>

Query response

 

{<NRf> <Nondecimal Numeric>}

<NR1>

 

0 ≤ N ≤ #HFFFF

 

 

 

 

Reset Value

0

 

Errors and Events

±222, ªData Out of Rangeº

 

You attempted to set the enable register to an illegal value.

Dependencies

None

 

Examples

Command: STAT:QUES:VOLT:ENAB #H3FFF

 

Query:

STAT:QUES:VOLT:ENAB?

 

Response:

16383

Related Commands STATus:QUEStionable:VOLTage?

STATus:QUEStionable:VOLTage:CONDition?

STATus:PRESet

3±94

VX1410A & VX1420A IntelliFrame Mainframe Instruction Manual