Getting Started

NOTE. The 13.25-inch vertical clearance is only valid for the mainframe without the plastic feet, rails and cable trays. Refer to Figures 4±2, 4±4, and 4±5 on pages 4±11, 4±12, and 4±13 for information on vertical clearances of the mainframe with cable tray options.

12.0in

(304.8 mm)

14.0in

(355.6 mm)

Left-front rail

1.5in

(38.1 mm)

0.5 in (12.7 mm)

(For correct position of

securing holes)

Figure 1±8: Vertical clearance for rack installation (standard mainframe)

7.Select the mounting method according to the rack type.

To mount the slide-out tracks with the front and rear flanges outside of the front and rear rails, use method A shown in Figure 1±9 when doing step 8. Add a bar nut to the installation only if the rails have untapped holes.

To mount with front and rear flanges inside of the rails, use mounting method B shown in Figure 1±9 when doing step 8. This mounting method assumes untapped holes.

1±16

VX1410A & VX1420A IntelliFrame Mainframe Instruction Manual